Chaudhry Traders
Chaudhry Traders
Chandni Chowk, Delhi
GST No. 07DAQPR1853B1ZK
TrustSEAL Verified
Call 0794254923378% Response Rate
SEND EMAIL

Development Board

Providing you the best range of microprocessor development board, 0.96 oled display, atmega328p pu ic and oled display with effective & timely delivery.

Microprocessor Development Board

Microprocessor Development Board
  • Microprocessor Development Board
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price

Product Details:

Processor8051
MaterialPCB
Core ArchitectureARM
Power SourceElectric
Voltage5V

Established in the year 2018, Chaudhary Traders is known as a reputed Manufacturer, Wholesaler, Trader and Retailer of quality Relay Board, UNO Shield, Raspberry PI Board and much more.
Request
Callback
Yes! I am Interested

0.96 Oled Display

0.96 Oled Display
  • 0.96 Oled Display
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price
This 0.96” I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino. Pin Definition: 1.GND: Power ground 2.VCC: Power positive 3.SCL: Clock wire 4.SDA: Data wire.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 100 Piece
Yes! I am Interested

Atmega328P Pu Ic

Atmega328P Pu Ic
  • Atmega328P Pu Ic
Get Best Quote
Approx. Price: Rs 285 / PieceGet Latest Price

Product Details:

BrandAtmel
Model Number328

The ATMEGA328P-PU is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328P-PU achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU),allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers. The ATmega328P-PU AVR is supported with a full suite of program and system development tools including: C Compilers, Macro Assemblers, Program Debugger/Simulators, In-Circuit Emulators, and Evaluation kits. Features :- High Performance, Low Power Design 8-Bit Microcontroller Atmel® AVR® advanced RISC architecture 131 Instructions most of which are executed in a single clock cycle Up to 20 MIPS throughput at 20 MHz 32 x 8 working registers 2 cycle multiplier Memory Includes 32KB of of programmable FLASH 1KB of EEPROM 2KB SRAM 10,000 Write and Erase Cycles for Flash and 100,000 for EEPROM Data retention for 20 years at 85°C and 100 years at 25°C Optional boot loader with lock bits In System Programming (ISP) by via boot loader True Read-While-Write operation Programming lock available for software security I/O and Package 23 programmable I/O lines 28 pin PDIP package Operating voltage:1.8 - 5.5V Operating temperature range:40°C to 85°C Speed Grades: 0-4 MHz at 1.8-5.5V 0-10 MHz at 2.7-5.5V 0-20 MHz at 4.5-5.5V Low power consumption mode at 1.8V, 1 MHz and 25°C: Active Mode: 0.3 mA Power-down Mode: 0.1 μA Power-save Mode: 0.8 μA (Including 32 kHz RTC)
Request
Callback
Yes! I am Interested

Oled Display

Oled Display
  • Oled Display
Get Best Quote
Approx. Price: Rs 160 / PieceGet Latest Price
This 0.91” I2C OLED Display is an OLED monochrome 128×32 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. The driver IC is SSD1306 with the I2C interface. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3V-5V microcontroller, such as Arduino. Pin Definition: 1.GND: Power ground 2.VCC: Power positive 3.SCL: Clock wire 4.SDA: Data wire.
Request
Callback


Additional Information:

  • Minimum Order Quantity: 100 Piece
Yes! I am Interested

Oled Display

Oled Display
  • Oled Display
Get Best Quote
Approx. Price: Rs 305 / PieceGet Latest Price
This is a 1.3 inch blue OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header pre-soldered to board. OLED (Organic Light-Emitting Diode) is a self-light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material, and choice of electrode are the key factors that determine the quality of OLED components. Pin Details: GND (power ground) VCC (positive power supply) SCL (clock line) SDA (data line) Features: Only Need 2 I/O Port to Control Resolution : 128×48 pixels Color: Blue Fully Compatible with Arduino Working temperature: -30°C ~ 70°C Factory configured for SPI protocol (can be easily changed to IIC) Useful Links: SPI/I2C Library for Arduino GFX Library for Arduino Package Includes: 1 x 1.3 Inch I2C IIC 4 pin OLED Display Module with VCC GND-Blue
Request
Callback
Yes! I am Interested
X

Explore More Products

View All Products




Reach Us
Robin Chaudhary (Owner)
Chaudhry Traders
Sh No-617 , Old, Lajpat Rai Market
Chandni Chowk, Delhi - 110006, India


Call Us


Send E-mail