Bms Board

Product Details:

A 2S 5A BMS for 18650 batteries is a Battery Management System designed to protect and regulate a pack of two 18650 lithium-ion cells connected in series ("2S"). This configuration creates a battery pack with a nominal voltage of 7.4V. The 5A designation refers to the maximum continuous discharge current the board can safely handle

Product Details:

A BMS (Battery Management System) 2S 20A is a protection circuit for a battery pack composed of two lithium-ion cells connected in series (2S). It ensures the safe charging and discharging of the batteries, preventing overcharging, over-discharging, and short circuits

Product Details:

A "BMS 3S 12V 18650 11.1V 12.6V 5A" is a Battery Management System (BMS) for a battery pack composed of three 18650 lithium-ion cells connected in series. It is designed to protect and manage the charging and discharging of the battery pack, with a continuous current rating of 5 amperes (A). 

Product Details:

A 3S 12V 18650 BMS 11.1V 12.6V 6A is a Battery Management System designed to safely manage a battery pack made of three lithium-ion 18650 cells connected in series. The 11.1V and 12.6V refer to the battery pack's nominal and maximum charge voltages, respectively. 

Product Details:

18650-based lithium-ion battery pack, a 3S 12V 10A BMS (Battery Management System) is the standard choice. The specifications you listed, including 11.1V (nominal), 12.6V (fully charged), and 10A (maximum continuous discharge current), are typical for this type of module. The designation "HX-3S-01 15_2 IC ONE" points to a specific model from the manufacturer Electrobot, indicating an enhanced IC version. 

Product Details:

A 3S 12V 25A Battery Management System (BMS) board is a crucial component for safely charging, discharging, and protecting a battery pack made from three 18650 lithium-ion cells connected in series. The "3S" indicates three cells in series, resulting in a nominal voltage of 11.1V (3×3.7V3 cross 3.7 cap V3×3.7��) and a maximum charge voltage of 12.6V (3×4.2V3 cross 4.2 cap V3×4.2��). The "25A" rating specifies the maximum continuous discharge current the board can handle safely.

Product Details:

A BMS 4S 20A lithium battery protection board is a Battery Management System designed to protect a battery pack of four lithium cells connected in series (4S), which has a maximum continuous discharge current of 20 amps. The BMS prevents damage from overcharging, over-discharging, overcurrent, and short circuits, thereby extending the life of the battery.

Product Details:

Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection, it needs to be charged firsts for activation, only then output will be available. Attention: Do not mix good battery and damaged battery when using it. The internal resistance of 3 battery capacity should be closer for better results. VERY IMP NOTE : Once all connections are done between battery pack and BMS, please give a initial charge to the battery pack first to activate the BMS. Number of Cells: 3, Working Current: 10A Peak Current: 20A Over Charge Voltage Range: 4.25-4.35V ± 0.05V Over Discharge Voltage Range: 2.5-3.0V ± 0.05V

Product Details:

Step Up Boost Converter with USB Type C for 5V 1A Charging Power Bank Module This is a Type-C USB 5V 1A Step-Up Boost Converter with a USB Charger. Great Step-up Module with 5V input, and output 5V for many digital devices, so this is really a great module for designing a portable charger. Useful for your USB charger projects and onboard USB device supply solutions. Charge and discharge status indication. Red light flashes when charging; Red light is always on when full; Blue light flashes when discharging.. Input Voltage: 3.7V-5.5V; Output Voltage & Current: 5V 1A.. Internally installed charging and discharging power. Integrated charge management and discharge management. Supports trickle mode and zero voltage charging. Intelligent temperature control and over-temperature protection; Integrated output overvoltage protection, short circuit protection, overload protection; Integrated over-charge and over-discharge protection.

Product Details:

Numerous options are available for a 3S 40A 18650 BMS board suitable for 11.1V to 12.6V battery packs. The specific version you choose may depend on whether you need a balancing function. Most boards have features that protect against overcharging, over-discharging, over-current, and short-circuiting.

Product Details:

here are many options available for a 3S 60A 18650 BMS (Battery Management System), as it is a common component for DIY battery packs and high-drain electronics. A BMS is necessary for safety, providing overcharge, over-discharge, short-circuit, and overcurrent protection, and often includes cell balancing to maximize battery life.